How to STOP Repeat Failures By Using Equifactor® Equipment Troubleshooting

Stop Repeat Equipment Failures

One of the biggest equipment reliability issues is wasting time fixing equipment failures more than one time.

We’ve all seen it. A piece of equipment fails, the mechanics jump on the failure and replace some parts, and days to weeks later, the same equipment fails again for seemingly the same reason.

I’ve seen this happen two, three, and even four times in a row.

I’ve seen a pump fail on an offshore oil production platform every month or two for years, and nobody did anything except send it off to be repaired.

I’ve seen an investigation by the CSB that had over 15 repeat equipment failures, and the next failure was part of a serious accident. Imagine 15 chances to prevent a major accident, but nobody did anything to prevent it.

Stop Repeat Failures

What do you do to stop repeat failures? Effective equipment failure troubleshooting and root cause analysis with effective corrective actions is the key to stopping repeat failures.

How do you perform effective troubleshooting? See the video below…

Learn About Equifactor® Troubleshooting and TapRooT® Root Cause Analysis

Attend the new Equifactor® Equipment Troubleshooting & TapRooT® Root Cause Analysis Course to learn these effective methods to troubleshoot equipment failures and prevent repeat failures by applying TapRooT® Root Cause Analysis and using the Corrective Action Helper® to develop effective corrective actions.

You will be surprised by the amount of lost production time you will prevent and how many maintenance dollars you will save. Not only that but reducing the amount of unplanned maintenance in the field will improve your maintenance safety record (planned work is safer than emergency work).

Register for the Next Public Equifactor® Course!

When is the next public Equifactor® Course? CLICK HERE to find out. Then, pick the location and dates that work best for you and get registered.